Repairing and Resurfacing
An Asphalt or Concrete Court Is Not Rocket Science,
It's Just Common Sense!
The MultiSkate Acrylic Coating System
is a 100% acrylic emulsion, non-flammable system consisting of one or two coats (as required) of MultiCover Neutral Acrylic Resurfacer with Sand to reduce surface porosity, allowing for applications of an even, full depth color of two coats of MultiSkate Color. It is recommended to tint the MultiCover neutral base coat with some of the finished color while adding water and batching in a drum. MultiCover and MultiSkate are packaged in 5-gallon pails for ease of on-site handling. MultiCover Acrylic Resurfacer base coating with Sand - 73 lb. MultiSkate – 47 lb.
The MultiSkate Color
system can be applied to any properly prepared asphalt or concrete pavement where In-Line Hockey play is desired.
Colors: Ice Blue and Dove Grey.
MultiCover Neutral Acrylic Resurfacer with Sand: 300 to 600 sq.ft per pail for one coat. Coverage will vary due to surface porosity.
MultiSkate Color: 600 to 680 sq.ft. per pail for one coat.
New asphalt must cure for 21 days prior to application of coatings. Repair of pavement surface defects, cracks and depressions must be completed prior to coating applications. Pavement surface must be cleaned entirely of dust, dirt, mildew (if any) debris and all loose materials including vegetation. All repairs must be flush and smooth to adjoining surfaces. Unless the surface is new, it is strongly recommended to thoroughly power wash the entire surface.
Mixing and Application Procedures
MultiSkate Color is ready to use. Do not dilute. Apply two coats of MultiSkate Color over a properly prepared asphalt or concrete surface.
Read the container label before using. Follow label instructions.
When applying, air temperature must be a minimum of 50 degrees F. (10C) and rising. Do not apply if surface temperature exceeds 135 degrees F. (57C)
Do not apply when rain is imminent or forecast
When applying indoors, use with adequate ventilation during application and drying
Close containers when not in use
Do not store in direct sunlight or where temperature may exceed 100 degrees F.
KEEP FROM FREEZING
When applying surface coatings during periods of very hot weather, (80 degrees and above) apply coatings at the coolest part of the day, usually in the early morning. Do not apply if surface temperature is 135 degrees F. (57C) or above.
Drying Time: Allow each coat to dry thoroughly before applying successive coats. After applying lines, allow 48 hours prior to skating on surface.
Available Colors: Red, White and Blue. All line markings shall be laid out in accordance with The National In-Line Hockey Association Rink Diagrams. For line layout guidelines see Roller Hockey Line Layout Diagram
Please contact us if you have any questions about the resurfacing process that have not been answered by the above application guidelines.
Call For A Free Estimate Including Shipping
Give Us Your Court Dimensions and Zip Code and We'll Provide You With
A No Obligation Free Estimate Including Shipping Charge
International Inquiries Welcome.
Give us the name of your USA Freight Forwarder. We'll do the rest!